DISCUSSION
Exercise:
3.
4. The KVA connected to each phase should be of equal value.
To accomplish
this, connect the loads as follows:
Load 1 to phase 1 as L1
Load 2 to phase 2 as L2
Load 3 to phase 3 as L3
Load 4 to all three phases as L4
Load 5 t phase 1 as L5
Load 6 to phase 2 as L6
Figure ID shows the loads connected to the system.
Figure 1D.
For use with the solution to exercise 4.
2-2
Previous Page
