Lesson 2/Learning Event 1
MAINTENANCE REQUESTS
The workflow for maintenance requests is outlined in Figure 5. The DA Form
2407 (Maintenance Request) is used at unit level maintenance for--
Requesting maintenance from supporting activities.
Reporting warranty claims.
Requesting application of modification work orders (MWO) by support.
Reporting MWOs done at unit level.
FIGURE 5.
DA FORM 2407 (MAINTENANCE REQUEST) WORKFLOW
The unit mechanic verifies that the equipment has a higher-level fault and
ensures that all unit faults have been corrected.
The DA Form 2407 is
initiated and recorded on DA Form 2405 (Maintenance Request Register). The
equipment is then taken to the supporting maintenance unit. The inspection
section will confirm that direct support (DS) work is required and that all
maintenance has been performed. The supporting maintenance unit will notify
the supported unit when the equipment is repaired. After the equipment is
returned, DA Form 2405 is posted to show the maintenance request is closed.
The unit and/or support maintenance NMCS/NMCM time is posted onto DD Form
314 and the equipment is made available for use.
35
Previous Page
