12.
When the networking method is selected, the surveyor should devise a survey
network that is _______________________________________________________________________.
A.
Algebraically stabled
B.
Geometrically sound
C.
Open
D.
Closed
13.
HI measurements should be determined to the nearest millimeter in metric
units and the nearest ________________________________________________________ in US units.
A.
1.0 foot
B.
0.1 foot
C.
0.01 foot
D.
0.001 foot
14.
The main advantage of a stop-and-go kinematic survey over a static survey is the
___________________________________________________________________________________.
A.
Reduced occupation time required
B.
Accuracy
C.
Fewer number of satellites required
D.
Fewer number of personnel required
15.
Under ideal test conditions, kinematic GPS can achieve what kind of accuracy level over
distances up to 30 kilometers?
A.
Millimeter-level
B.
Centimeter-level
C.
Decimeter-level
D.
Meter-level
16.
How long is a rover receiver required to stay at each unknown station to achieve rapid static?
A.
30 to 45 minutes
B.
10 to 25 minutes
C.
5 to 20 minutes
D.
1 to 10 minutes
17.
Position misclosures (in X and Y) are distributes among the points on the
traverse using _______________________________________________________________________.
A.
Various weighting methods
B.
Various criteria
C.
Algebraic formulas
D.
Common sense
EN0593
5-54