LESSON 1
ANALYZE A ROCK CRUSHING COMPLEX
LESSON DESCRIPTION:
This lesson will teach you how to analyze a rock crushing requirement and select the appropriate equipment. You
will also learn how to select a site and design a layout for a rock crusher complex, and evaluate the operation of
the complex.
TERMINAL LEARNING OBJECTIVES:
ACTION:
Identify the rock crushing equipment, select the equipment and a site for the rock crusher
complex, plan the layout of the complex, and evaluate the operation of the complex.
CONDITIONS:
Given this subcourse, a No. 2 pencil, paper, and an ACCP Examination Response Sheet.
STANDARDS:
Demonstrate competency of the task skills and knowledge by responding correctly to
70% of the examination questions.
REFERENCES:
The materials contained in this lesson was derived from TM 5-331-C and TM 5-332.
INTRODUCTION
Many engineer operations require the supply of aggregates and other quarry materials for construction use. As a
military engineer you should be familiar with the product requirements and equipment necessary to produce
finished aggregate from raw quarry material.
Equipment is provided in the military supply system to enable units to meet their aggregate production
requirements. Of this equipment, the crushing equipment is usually the critical item. It must be capable of
receiving reduction and processing, and producing the finished aggregate in sufficient quality and quantity to
meet the job requirements.
EN5464
1
Previous Page
