a.
where it is used
a.
2
c. 1
b.
how it is fastened
b.
1 1/4
d. 1/2
c.
width of material
d.
thickness of material
15. What wood do you recommend for building
a boat?
9. You are fastening large tops of furniture.
Regardless of the method that you use, what do you
a.
cedar
c. walnut
make sure that the selected method does?
b.
redwood
d. fir
a.
allows for shrinking and swelling
16.
What kind of wood is generally white,
b.
uses no dowels
has heartwood of reddish brown to dull brown, which
c.
avoids use of fasteners and glue
sometimes turns to a lavender tinge, and has a pungent
d.
combined tops have different grain patterns
odor, bitter taste, and low strength?
10. You must build benches for the shuttle bus
a.
oak
c. redwood
stops on your post. What kind of wood do you
b.
fir
d. cedar
select?
17. In cabinetmaking what are the determining
a.
fir
c. redwood
factors in the wood selected?
b.
cedar
d. white pine
a.
strength
11. You are ready to assemble your wood pieces
b.
heaviness
c.
beauty and finishing qualities
into an article of furniture. Before putting the pieces
d.
beauty
into final form, what is the last thing you do?
l8. Select the choice that lists four variations of
a.
check each piece for size, shape, and fit
the mortise and tenon joint.
b.
verify sequence of assembly
c.
assure that each piece was milled properly
a.
open, through, blind, haunched
d.
arrange for use of duplicate pieces
b.
open, haunched, miter, grooved
c.
lap, slip, grooved, dado
12. What is the highest grade of hard wood?
d.
dovetail, dowel, corner, butt
a.
No. 1 common
19. How would you reinforce a plain miter?
b.
first
c.
No. 2 common
a.
add dovetail joint
d.
select
b.
use a spline
c.
add a panel
13. What type of joint is most often used for
d.
add dado housing
constructing building frames?
20. Why is frame construction preferred over
a.
lap
c. tenon
stool construction?
b.
miter
d. open mortise
a.
grain runs differently in length and width
14. What is the maximum diameter of a dowel
b.
dowel joints work well
in inches that you would use on a board 2 inches
c.
overcomes shrinkage and swelling
thick?
d.
panels cannot shrink
1-2
Previous Page
