(on-site inspection) (2-51)
FRAME 2-52.
The exact dimensions of features can be measured and reported by ground parties. These include such items as
stream widths, tunnel clearances, etc.
Ground parties can __________________________ the exact dimensions of feats.
(key; map; sketch; overlay) (2-75)
FRAME 2-76. INFORMATION FRAME.
The object, shown in the next column, is either symbolized or briefly described. The symbols used are standard
and are taken from FM 5-34, Engineer Field Data. Refer to Appendix 1 at the end of this booklet. This is an
enlarged reproduction of the Engineer Reconnaissance Card. On pages 5 and 7 of this Appendix, you will find the
symbols used in the sample report in Panel 2-2.
2-8
Previous Page
